SPL Parts PRO Solid Aluminum Subframe Bushings (SSB) replace the stock mushy rubber bushings to eliminate free play of the subframe relative to the chassis. This prevents the subframe from "bouncing...

The SPL NA / NB Miata Tie Rod Kit allows for bumpsteer adjustment by allowing the tie rod end pivot to be relocated with the use of spacers on Miatas with the factory manual steering rack. This...

The stock eccentric bolts provided by Nissan for small camber/toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout (EL) kit...

For models with HICAS (High Capacity Actively Controlled Steering), our SPL Parts HICAS Eliminator Kit (HCK) eliminates the rear wheel steering feature. This provides a more linear driver control...

Our SPL Parts Tension Rods (TR) provide for adjustment of front caster, allowing you to change front caster to optimize the turn-in response and to compensate for variances between the left and right...

SPL Parts Tie Rod Ends allow the tie rod end pivot point to be relocated, which will correct bump steer resulting from a lowered vehicle, modified caster or lower arm geometry, thus reducing lap...

NA Miata Front Outer Tie Rod Ends (TRE) allow for bumpsteer adjustment by allowing the tie rod end pivot to be relocated with the use of spacers. Reduced bumpsteer results in smoother steering and...

For non-Hicas models, SPL Parts Rear Toe Arms (RTA) allow for an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments.Our Rear Toe Links feature gun...

Our SPL Rear Upper Arms (RUA) allow for an increased range of rear camber adjustment, necessary for lowered cars and performance alignments. This provides more stability and predictability to the...

SPL Parts Front Tie Rod Ends (TRE) allow the tie rod end pivot point to be relocated, which will correct bump steer resulting from a lowered vehicle, modified caster or lower arm geometry, thus...

SPL Parts PRO Solid Aluminum Subframe Bushings (SSB) replace the stock mushy rubber bushings to eliminate free play of the subframe relative to the chassis. This prevents the subframe from "bouncing...

SPL Parts FKS Rear Knuckle Monoball Bushings (RKB) replace the stock mushy rubber bushings with low-friction articulating spherical bearings, eliminating bushing flex, and reducing bind/friction. ...